Setting Paper On The Bypass Tray - Ricoh 3532 Operating Instructions Manual

Preparing to Print
Setting Paper on the Bypass
Tray
This section gives instructions for set-
ting paper on the bypass tray. Use the
bypass tray to print onto OHP trans-
parencies, labels, thick paper, and en-
2
velopes that cannot be loaded in the
paper tray.
Reference
For setting paper in the regular pa-
per tray, see General Settings Guide.
Note
❒ When loading letterhead paper,
take care with its orientation. See
"Orientation-Fixed Paper or Two-
Sided Paper", General Settings
Guide.
❒ Paper within the following dimen-
sions can be set in the bypass tray:
• Vertical: 100.0-297.0 mm (3.93
in-11.69 in.)
• Horizontal:
(5.83 in.-23.62 in.)
❒ Be sure to set the paper with the
side you want to print facing down
in the bypass tray.
❒ When loading OHP transparencies
or thick paper in the bypass tray,
make the paper setting using the
control panel or the printer driver.
❒ The number of sheets that can be
loaded in the bypass tray depends
on the paper type.
Limitation
❒ The following functions are dis-
abled when printing from the by-
pass tray:
• Duplex Printing
• Auto Tray Select
• Auto Tray Switching
10
148.0-600.0 mm
• Rotating Collate
• Staple (when the optional unit is
installed)
• Punch (when the optional unit
is installed)
Important
❒ When printing using the printer
function, original images are al-
ways rotated by 180 degrees (the
orientation of images to be printed
is opposite to that of the copier
function). When printing onto pa-
per with specific orientation re-
quirements, such as envelopes and
letterheads, make sure to rotate the
paper feed orientation to 180 de-
grees.
❒ Make sure to set the paper size us-
ing the printer driver when print-
ing data from the computer. The
paper size set using the printer
driver has priority over the one set
using the display panel.
A A A A
Open the bypass tray.
B B B B
Adjust the paper guides to the pa-
per size.
Important
❒ If the paper guides are not flush
against the paper, skewed im-
ages or paper misfeeds might
occur.
ZEFH050J