Getting Started; Control Panel - Ricoh 3532 Operating Instructions Manual

Control Panel

1.
Shows errors and machine status.
m: Data In indicator
The Data In indicator shows the status of
data reception from a computer.
• This indicator blinks when data is be-
ing received.
• This indicator lights when there is
data remaining to be printed.
See "Multi-Access", General Settings
Guide.
L: Service call indicator
x: Misfeed indicator
M: Cover indicator
d: Add Staple indicator
D: Add Toner indicator
B: Load Paper indicator
See "Control Panel", General Settings
Guide.
{ { { { User Tools/Counter} } } } key
2.
• User Tools
Press to change default and condi-
tions to your requirements.
• Counter
Press to display or print the total num-
ber of copies made.

1. Getting Started

3.
Display panel
Shows operation status, error messages,
and function menus. p.4 "Display Panel"
{ { { { Energy Saver} } } } key
4.
Press to switch to and from Energy Saver
mode.
Note
❒ This key is ineffective during system
setting (User Tools) operations.
5.
Main power indicator
This indicator lights when the main pow-
er switch is turned on.
Important
❒ Do not turn off the main power
switch while the On indicator is lit
or blinking. Doing so may damage
the hard disk.
6.
On indicator
This indicator lights when the operation
switch is turned on.
7.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
ZHWS011N
3