Ricoh 3532 Operating Instructions Manual page 13

1
2
3
4
1.
Operational status or messages
Displays current machine status, such as
"Online", "Offline", and "Printing". Infor-
mation about the print job (user ID and
document name) appears in this section.
2.
[Online] key/[Offline] key
By pressing these keys, the machine
switches between online and offline.
When the machine is online, it can re-
ceive data from the computer.
When the machine is offline, it cannot re-
ceive data from the computer.
3.
[Form Feed] key
Press this key to print all the data left in
the machine's input buffer.
Note
❒ When the machine is online, the status
appears dimly.
❒ This function is not available with the
TM
RPCS printer language.
Note
❒ When the power is turned on, the copier display is shown. This is a factory
default. This initial setting can be changed. See "User Tools (System Set-
tings)", General Settings Guide.
❒ If the machine cannot be switched offline, change the system setting of [Signal
Control] to "Printer priority". For details about the setting, see "User Tools
(System Settings)", General Settings Guide.
5 6
4.
[Job Reset] key
Press this key to cancel the current print
job.
If you press it when the machine is offline
and Hex Dump is selected, Hex Dump is
canceled. See "Printer Features Parame-
ters", Printer Reference 2.
5.
[View Sample Print jobs] key
Press this key to print or change the num-
ber of remaining sets of Sample Print jobs
sent from a computer.
6.
[View Locked Print jobs] key
Press this key to print the Locked Print
jobs sent from a computer.
7.
[Paper Tray Status] key
The paper tray settings appear.
Control Panel
7
ZGWH030N
1
5