Gestetner 3355 User Manual page 33

Copying
B
Press the [Size Mag.] key.
2
C
Make sure that the [Size Mag.] key is highlighted.
D
Enter the length of the original with the number keys and press the [#] key.
Note
You can enter sizes within the following ranges:
Metric version
Inch version
To change the length entered, press the [Clear] or {Clear/Stop} key and enter
the new length.
E
Enter the length of the copy with the number keys and press the [#] key.
Note
To change the length entered, press the [Clear] or {Clear/Stop} key and enter
the new length.
To change the length after pressing the [#] key, select [Original] or [Copy]
and enter the desired length.
F
Press the [OK] key.
G
Press the [OK] key.
H
Set your original, then press the {Start} key.
100
1 – 999mm (in 1mm steps)
0.1" – 99.9" (in 0.1" steps)