Gestetner 3355 User Manual page 8

Swing out the extender to support paper sizes larger than A4L, 8
11"L.
Fan paper to get air between the sheets and avoid a multi-sheet feed.
Before setting, adjust the paper if curled or warped.
When copying onto non-standard size paper
Important
You should specify the size of copy paper to avoid paper misfeeds.
A Press the {#} key.
B Press the [Non Standard] key.
C Press the [Vert inch] key and enter the vertical size of the paper with the
number keys, then press the [#] key.
Note
To change the number entered, press the [Clear] or {Clear/Stop} key and
enter the new number.
D Enter the horizontal size of the paper with the number keys, then press
the [#] key.
Note
If the [Horz inch] key is not highlighted, press the [Horz inch] key.
To change the number entered, press the [Clear] or {Clear/Stop} key and
enter the new number.
E To register the non-standard size entered, press the [Store] key and then
press the [Cancel] key.
Copying from the Bypass Tray
1
/ "
2
2
75