Table of Contents
Advertisement
Copying
In Connect Copy mode, you can set only cover sheet paper and slip sheet pa-
per for the Cover/Slip Sheet function in the bypass tray.
A
Open the bypass tray.
2
B
Adjust the guides to copy paper size.
Important
If the guides are not flush with the copy paper, a skew image or paper mis-
feeds might occur.
C
Lightly insert the copy paper face up until the beeper sounds.
The k indicator on the display automatically goes on.
1.
Extender
Note
The face side of the paper set is copied on.
Do not stack paper over the limit mark, otherwise a skew image or paper
misfeeds might occur.
If the beeper is turned off, lightly insert the copy paper until it stops. See
"Operation Panel Beeper" in the System Settings manual.
When the document feeder is open, set the direction of the copy paper to
L.
74
ZBQH050E
1
ZBQH040E
Advertisement
Table of Contents
