Table of Contents
Advertisement
Copying
When original images are copied, the images are shifted by a width of the
binding margin. You can adjust the binding margin or binding position. You
can also change their default values. See "Front Margin: Left/Right", "Back
Margin: Left/Right", "Front Margin: Top/Bottom" and "Back Margin: Top/
Bottom" in
A binding margin can be automatically made on the back side. See "1
plex Auto Margin Adjust" in
A
2
Press the [Duplex/Combine] key.
B
Press the [1 Sided] key for original, then press the [2 Sided] key for copy.
Note
To change the copy orientation to "Top to Bottom", press the [Orientation]
key and select [Top to Bottom]. See
Originals".
C
Press the [OK] key.
D
Set your originals, then press the {Start} key.
When setting an original on the exposure glass or in the document feeder
using Batch (SADF) mode
Reference
P.36 "Batch (SADF) mode".
A Set the original, then press the {Start} key.
Note
Start with the first page to be copied.
112
P.317 "Page Format
P.317 "Page Format
1
/
".
2
1
/
P.110 "Specifying Orientation of Bound
2 Du-
".
2
Advertisement
Table of Contents
