Whirlpool SWA1040Q User And Care Manual page 41

Location to install the indoor unit
 Places where there are no obstacles near the exit and it can easily reach all
corners.
 Places where pipes can be installed, and wall holes can be easily made.
 Observe the necessary distance between the ceiling and the wall, according to
the wiring diagram.
 Places in which the air filter can be removed easily.
 Keep the unit and remote control within 1 m or more from the television, radio,
etc.
Do not place objects near the air inlet that can obstruct it.

 A place that supports the weight and that does not increase the noises and
vibrations caused by the operation.
Location for installation of the outdoor unit
 Perform the installation in a suitable and well-ventilated place, avoid doing it in places
where there may be flammable gas leaks.
 Keep the necessary distance from the wall.
 Do not install the outdoor unit in a dirty place with grease stains, near a vulcanized
gas outlet nor in coastal areas with high salinity.
 Avoid installing the unit next to a road, where you might receive splashes of dirty
water.
 Use a fixed base that does not increase the noise of the unit. The use of synthetic
rubber on the bases of the outdoor unit is recommended.
 Avoid obstructing the air outlet.
 Install it where the air discharge and the noise does not disturb the neighbors.
Model
SWA1040Q
SWA2040Q
SWA3020Q
SWA4020Q
SWA3120Q
SWA4120Q
SWA3220Q
SWA4220Q
Pipe length at
Allowed pipe
packaging (m)
limit (m)
4
4
4
4
4
4
4
4
Elevation difference
limit (m)
15 4
15 4
15 4
15 4
15 4
15 4
15 4
15 4
The maximum
pipe distance is
15 meters
The maximum
Exterior unit
distance
without using a
pipe extension
is 4 meters
Exterior unit
The maximum
pipe distance is
15 meters
The maximum
distance without
using a pipe
extension is 4
meters
Interior unit
Additional coolant
gas required (g/m)
20
20
20
20
20
20
30
30
18