Whirlpool SWA1040Q User And Care Manual page 34

7.- Clock function
You can adjust the time by pressing the Timer button. Press
this button and keep the button pressed for 3 seconds to
activate the clock setting, the clock digits will flash, then use
the + and - buttons to set the correct time, press the button
again for more than 3 seconds. The real time will have been
set.
Timer Mode (TIMER ON)
The TIMER mode can be configured when the equipment
needs to be turned on or off at a desired time
In Timer mode,
 Press the TIMER ON / CLOCK button. When the screen
starts blinking "ON 12:00" on the screen then you can
press the + or - buttons to select the desired time at which
the device will turn on.
Press the + or - button once to increase or decrease the
hour by 1 minute.
Press the + or - button and hold it for 5 seconds to
increase or decrease the time by 10 minutes.
Press the + or - button and hold it for a long time to
increase or decrease the hour by 1 hour.
Note: if the time cannot be set after pressing TIMER ON /
CLOCK, the remote control will exit the timer mode
automatically.
 When you want to see the set time to turn on the device
press the TIMER ON / CLOCK button and then confirm it
will sound a BEEP sound and the timer indicator button on
the indoor unit will turn on.
* Note: To cancel the timer mode on press the button, TIMER
ON / CLOCK a BEEP sound will hear, and the indicator on the
indoor unit will turn off, the timer mode will be off. The mode to
turn off the TIMER OFF device is also available and the mode
to adjust it is similar.
Turbo mode
 Turbo mode is used to start or stop rapid cooling or
heating.
Quick cooling operates the fan at high speed and
automatically sets the temperature to 16 °C.
The rapid heating is at a fan speed and automatically sets
the temperature to 30 °C.
In TURBO mode, you can set the air direction or the timer.

If you wish to deactivate the Turbo mode, press any button
between TURBO, MODE, FAN, OFF / ON, PERFECT
DREAM, TEMPERATURE ADJUSTMENT, the screen will
return to the original mode.
Note:
 The SLEEP (sleep) and SMART buttons are not available
in the TURBO mode.
 The appliance will continue to operate in the TURBO
mode for 15 minutes if you do not deactivate it by pressing
any of the buttons mentioned above.
Turbo
Smart Display Off
11