Whirlpool SWA1040Q User And Care Manual page 35

8.- Around you
When you press this button, this icon will light , the remote
transmits the current temperature of the room to the indoor unit,
and the appliance will operate according to this temperature to
make it comfortable. Please keep the remote control in a
location where it can transmit the signal to the indoor unit
correctly.
Press once to activate and again to cancel.
Turbo
Smart Display Off
9.- Screen turn off function
Press the DISPLAY OFF button to turn the screen light on or off
on the control panel of the indoor unit.
Press once to turn off the light of the indoor unit's screen, press
again or press any other button to turn on the screen again.
Turbo
If you press the other buttons when the light on the unit's
Display Off
Smart
display is off, press once to turn on the light, press a second
time to activate the function.
10.- Energy saving function
The POWER SAVER energy saving mode can be activated in
the Cooling, Heating, and Ventilation operation mode only.
When you press this button, this icon will be displayed on the
remote control
The POWER SAVER function will adjust the temperature to
25°C with a low fan speed in the heating cooling mode and dry
mode, when the fan mode is selected it will only be set at a low
fan speed.
Turbo
Change the mode or press the energy saving button again to
Smart Display Off
cancel this function
Note: The fan speed and temperature cannot be adjusted under
this mode. The "TURBO" function cannot be used in this case.
12