Digitus DN-80201 Manual
  1. Manuals
  2. Brands
  3. Digitus Manuals
  4. Switch
  5. DN-80201
  6. Manual

Digitus DN-80201 Manual

2sfp port 10/100/1000mbps web smart ethernet switch
Hide thumbs Also See for DN-80201:
Table of Contents

Advertisement

Quick Links

Download this manual
2SFP Port 10/100/1000Mbps
Web Smart Ethernet Switch
DN-80201
DN-80211-1
DN-80221-1
Manual
DN-80201  DN-80211-1  DN-80221-1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DN-80201 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digitus DN-80201

Summary of Contents for Digitus DN-80201

  • Page 1 2SFP Port 10/100/1000Mbps Web Smart Ethernet Switch DN-80201 DN-80211-1 DN-80221-1 Manual DN-80201  DN-80211-1  DN-80221-1...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1 Product Introduction ..................4 1.1 Product Overview ....................4 1.2 Features (8 port )………………………………………………………………………..4 1.2.1 Features ( 16 port )………….……………………………………………….……….5 1.2.2 Features ( 24 port )……………………………………………………………………5 1.3 External Component Description (8 port)…………………………………………….6 1.3.1 Front Panel (8 port)……………………………………………………………...6 1.3.2 Rear Panel (8 port)………………………………………………………………7 1.3.3 External Component Description (16 port)……………………………………..….8 1.3.4 Front Panel (16 port)………………………………………………………………….8...
  • Page 3 4.1.2 Logging Message ..................26 4.1.3 Port ......................26 4.1.4 Link Aggregation ..................28 4.1.5 LLDP Statistics ..................28 4.1.6 IGMP Snooping Statistics ................ 29 4.2 Network ......................30 4.2.1 IP Address ....................30 4.2.2 Time Settings ................... 30 4.3 Switching ......................31 4.3.1 Port Setting ....................
  • Page 4 4.8.1 LLDP ......................74 4.8.2 SNMP ...................... 78 4.8.3 RMON ...................... 82 4.9 Diagnostics ......................84 4.9.1 System Status ..................84 4.9.2 Ping Test ....................84 4.9.3 Logging Setting ..................85 4.9.4 Factory Default ..................86 4.9.5 Reboot Switch ..................86 4.10 Maintenance ....................

  • Page 5: Chapter 1 Product Introduction

    Chapter 1 Product Introduction Congratulations on purchasing of the Web Smart Ethernet Switch. Before you install and use this product, please read this manual carefully for full exploiting the functions of this product . 1.1 Product Overview The 8/16/24 port + 2SFP 10/100/1000Mbps Managed Ethernet Switch provides seamless network connection.

  • Page 6: Features (16 Port)

    1.2.1 Features (16 port)  Comply with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3z, EEE802.3ad standards  Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode  Supports MAC address auto-learning and auto-aging  Store and forward mode operates Support SNMP/RMON/TELENT ...

  • Page 7: External Component Description (8 Port)

    1.3 External Component Description (8 port) 1.3.1 Front Panel (8 port) The front panel of the Switch consists of 8 x 10/100/1000Mbps RJ-45 ports, 2 x SFP ports, 1 x Console port, 1 x Reset button and a series of LED indicators as shown as below.

  • Page 8: Rear Panel (8 Port)

    Figure 2 - LED Indicators The following chart shows the LED indicators of the Switch along with explanation of each indicator. COLOR STATUS STATUS DESCRIPTION Power On Power Green Power Off 10/100Mbps: A device is connected to the port LNK/ACT/ Orange No device is connected to the port Speed...

  • Page 9: External Component Description (16 Port)

    1.3.3 External Component Description (16 port) 1.3.4 Front Panel (16 port) The front panel of the Switch consists of 16 x 10/100/1000Mbps RJ-45 ports, 2 x SFP ports, 1 x Console port, 1 x Reset button and a series of LED indicators as shown as below.

  • Page 10: Rear Panel (16 Port)

    The following chart shows the LED indicators of the Switch along with explanation of each indicator. COLOR STATUS STATUS DESCRIPTION Power On Power Power Off A device is connected to the port 10/100Mbps: LNK/ACT/ Orange Speed No device is connected to the port 1000Mbps: (1~16) Green...

  • Page 11: External Component Description (24 Port)

    1.3.6 External Component Description (24 port) 1.3.7 Front Panel (24 port) The front panel of the Switch consists of 24 x 10/100/1000Mbps RJ-45 ports,2 x SFP ports,1 x Console port, 1 x Reset button and a series of LED indicators as shown as below.

  • Page 12: Rear Panel (24 Port)

    The following chart shows the LED indicators of the Switch along with explanation of each indicator. COLOR STATUS STATUS DESCRIPTION Power On Power Power Off A device is connected to the port 10/100Mbps: LNK/ACT/ Orange Speed A device is disconnected to the port 1000Mbps: (1~24) Green...

  • Page 13: Package Contents (16 Port)

    part is lost and damaged, please contact your local agent immediately. In addition, make sure that you have the tools install switches and cables by your hands.  One Web Smart Ethernet Switch Four rubber feet, two mounting ears and eights screws ...

  • Page 14: Chapter 2 Installing And Connecting The Switch

    Chapter 2 Installing and Connecting the Switch This part describes how to install your Web Smart Ethernet Switch and make connections to it. Please read the following topics and perform the procedures in the order being presented. 2.1 Installation Please follow the following instructions in avoid of incorrect installation causing device damage and security threat.

  • Page 15: Power On The Switch (8 Port)

    Use the screws provided with the equipment rack to mount the Switch on the rack and tighten it. Figure 5 - Rack Installation 2.1.3 Power on the Switch (8 port) The Switch is powered by AC 100-240V 50/60Hz internal high-performance power supply. Please follow the next tips to connect: AC Electrical Outlet: It is recommended to use single-phase three-wire receptacle with neutral outlet or...

  • Page 16: Rack-Mountable Installation In 19-Inch Cabinet (16 Port)

    Figure 4 - Desktop Installation 2.1.5 Rack-mountable Installation in 19-inch Cabinet (16 port) The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring closet with other equipment. To install the Switch, please follow these steps: Attach the mounting brackets on the Switch’s side panels (one on each side) and secure them with the screws provided.

  • Page 17: Power On The Switch (16 Port)

    Figure 6 - Rack Installation 2.1.6 Power on the Switch (16 port) The Switch is powered on by the AC 100-240V 50/60Hz internal high-performance power supply. Please follow the next tips to connect: AC Electrical Outlet: It is recommended to use single-phase three-wire receptacle with neutral outlet or multifunctional computer professional receptacle.

  • Page 18: Rack-Mountable Installation In 19-Inch Cabinet (24 Port)

    Figure 4 - Desktop Installation 2.1.8 Rack-mountable Installation in 19-inch Cabinet (24 port) The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring closet with other equipment. To install the Switch, please follow these steps: Attach the mounting brackets on the Switch’s side panels (one on each side) and secure them with the screws provided.

  • Page 19: Power On The Switch (24 Port)

    Use the screws provided with the equipment rack to mount the Switch on the rack and tighten it. Figure 6 - Rack Installation 2.1.9 Power on the Switch (24 port) The Switch is powered on by the AC 100-240V 50/60Hz internal high-performance power supply.

  • Page 20: Chapter 3 How To Login The Switch ( 8 Port )

    Chapter 3 How to Login the Switch (8 port) 3.1 Switch to End Node (8 port) Use standard Cat.5/5e Ethernet cable (UTP/STP) to connect the Switch to end nodes as described below. Switch ports will automatically adjust to the characteristics (MDI/MDI-X, speed, duplex) of the device to which is connected.
  • Page 21 Figure 7 - Login Window Enter the Username and Password (The factory default Username is admin and Password is admin), and then click “LOGIN” to log in to the Switch configuration window as below. Figure 8 - Configuration Window...

  • Page 22: How To Login The Switch ( 8 Port )

    Chapter 3 How to Login the Switch (16 port) 3.3 Switch to End Node (16 port) Use standard Cat.5/5e Ethernet cable (UTP/STP) to connect the Switch to end nodes as described below. Switch ports will automatically adjust to the characteristics (MDI/MDI-X, speed, duplex) of the device to which is connected.
  • Page 23 Figure 8 - Login Window 10. Enter the Username and Password (The factory default Username is admin and Password is admin), and then click “LOGIN” to log in to the Switch configuration window as below. Figure 9 - Configuration Window...

  • Page 24: Chapter 3 How To Login The Switch ( 16 Port )

    Chapter 3 How to Login the Switch (24 port) 3.5 Switch to End Node (24 port) Use standard Cat.5/5e Ethernet cable (UTP/STP) to connect the Switch to end nodes as described below. Switch ports will automatically adjust to the characteristics (MDI/MDI-X, speed, duplex) of the device to which is connected.
  • Page 25 Figure 8 - Login Window 15. Enter the Username and Password (The factory default Username is admin and Password is admin), and then click “LOGIN” to log in to the Switch configuration window as below. Figure 9 - Configuration Window...

  • Page 26: Chapter 4 Switch Configuration

    Chapter 4 Switch Configuration The Web Smart Managed switch software provides rich layer 2 functionality for switches in your network. This chapter describes how to use Web-based management interface (Web UI) to configure managed switch software features. In the Web UI, the left column shows the configuration menu. The top row shows the switch’s current link status.

  • Page 27: Logging Message

    System Name: System name of the switch. This name will also use as CLI prefix of each line. (“Switch>” or “Switch#”). System Location: System location of the switch. System Contact: System contact of the switch. 4.1.2 Logging Message To display Logging Message web page, click Status > Logging Message Target: Select the log message source to show on the table.
  • Page 28 This page displays standard counters on network traffic form the Interfaces, Ethernet-like and RMON MIB. Interfaces and Ethernet-like counters display errors on the traffic passing through each port. RMON counters provide a total count of different frame types and sizes passing through each port.

  • Page 29: Link Aggregation

    4.1.4 Link Aggregation To display Link Aggregation web page, click Status > Link Aggregation This page displays trunk information, report trunk situation, functional ports and alternative ports. LAG: LAG ID. Name: LAG Name. Type: The type of the LAG group: a static LAG or an LACP LAG. 4.1.5 LLDP Statistics To display LLDP Statistics status, click Status >...

  • Page 30: Igmp Snooping Statistics

    Insertions: The number of times the complete set of information advertised by a particular MAC Service Access Point (MSAP) has been inserted into tables associated with the remote systems. Deletions: The number of times the complete set of information advertised by MSAP has been deleted from tables associated with the remote systems.

  • Page 31: Network

    4.2 Network Use the Network page to configure settings for the switch´s network interface. 4.2.1 IP Address To display IP Address web page, click Network > IP Address This page allow user to edit IP address, Subnet Mask and Gateway. Mode: Select the mode of network connection.

  • Page 32: Switching

    4.2.2.2 SNTP Settings To display SNTP Settings web page, click Network > Time Settings > SNTP Settings SNTP Server Address: The IP address of SNTP/NTP server. Server Port: The Port Number of SNTP/NTP server. 4.3 Switching Use the Switching pages to configure settings for the switch ports, trunk, layer 2 protocols and other switch features.

  • Page 33: Error Disabled

    Port Select: Select one or multiple ports to configure. Enabled: Port admin state. Enabled: Enable the port.  Disabled: Disable the port.  Speed: Port speed capabilities. Auto: Auto speed with all capabilities.  Auto-10M: Auto speed with 10M ability only. ...

  • Page 34: Mirror

    4.3.3 Mirror To display Local Mirror Setting web page, click Switching > Mirror > Local Mirror Setting Port mirroring is copy the TX/RX data flow from the source port to the aiming port, commonly used in port mirroring. 4.3.4 Link Aggregation Link aggregation combine multiple Ethernet ports together to form a logical port, it supports static allocation or LACP.
  • Page 35 4.3.4.2 LAG Management To display LAG Management web page, click Switching > Link Aggregation > LAG Management This page is used to create new LAG, ports aggregation type and select member ports. 4.3.4.3 LAG Port Setting To display LAG Port setting web page, click Switching > Link Aggregation > LAG Port Setting This page is used to set LAG status, speed and flow control function.
  • Page 36 4.3.4.4 LACP Setting To display LACP Setting web page, click Switching > Link Aggregation > LACP Setting This page is used to configure the system Priority of LACP. System Priority: Configure the system priority of LACP. This decides the system priority field in LACP PDU.

  • Page 37: Vlan Management

    4.3.5 VLAN Management 4.3.5.1 Create VLAN To display Create VLAN web page, click Switching > VLAN Management> Create VLAN This page allow user to add, delete or edit VLAN settings. VLAN LIST: VLAN LIST for the new VLAN. VLAN Action: Add or delete VLAN. VLAN Name Prefix: VLAN Name Prefix for the new VLAN.
  • Page 38 Port Select : Select one or multiple ports to configure. Interface VLAN Mode: VLAN port mode PVID: VLAN ID for the selected ports. Accepted Type: Port accepted type. All: Accept tagged and untagged frames.  Tag Only: Only accept tagged frame. ...
  • Page 39 4.3.5.5 Protocol VLAN Group Setting To display Protocol VLAN Group Setting web page, click Switching> VLAN> Protocol VLAN Group Setting The VLAN group setting sets the same type as a group and transmit it in the specific VLAN. Group ID(1-8) : Enter an ID number of the group, between 1 and 8. Group Name: This is used to identify the new Protocol VLAN group.

  • Page 40: Multicast

    This page is used to divide the port into groups and map it to the VLAN. Port: Select the specified ports you wish to configure by selecting the port in this list. Group: Click the corresponding radio button to select a previously configured Group ID or Group Name.
  • Page 41 IGMP Snooping: Select IGMP Snooping enable or disable. IGMP Snooping Version: Select the IGMP Snooping Version, IGMPv2 or IGMPv3. IGMP Snooping Report Suppression: Select IGMP Snooping Report Suppression enable or disable. 2. IGMP Snooping Querier Setting To display IGMP Snooping Querier Setting web page, click Switching > Multicast > IGMP Snooping >...
  • Page 42 This page is used to configure specified ports as static member ports. 4. IGMP Group Table To display IGMP Group Table web page, click Switching > Multicast > IGMP Snooping > IGMP Group Table This page is used to display IGMP Group Table statistics information. 5.
  • Page 43 6. IGMP Router Table To display IGMP Router Table web page, click Switching > Multicast > IGMP Snooping > IGMP Router Table This page is used to display IGMP Router Table statistics information. 7. IGMP Forward All To display IGMP Forward All web page, click Switching > Multicast > IGMP Snooping > IGMP Forward All...
  • Page 44 4.3.6.3 Multicast Throttling Setting To display Multicast Throttling Setting web page, click Switching > Multicast >Multicast Throttling Setting This page is used to limit the port can join one of the biggest Multicast instance. 4.3.6.4 Multicast Filter This page allow user to create filter instance. 1.Multicast Profile Setting To display Multicast Profile Setting web page, click Switching >...

  • Page 45: Jumbo Frame

    2.Multicast Profile Setting To display IGMP Filter Setting web page, click Switching > Multicast > Multicast Filter > IGMP Filter Setting This page is used to filter the port to bind to that instance. 4.3.7 Jumbo Frame To display Jumbo Frame web page, click Switching > Jumbo Frame Jumbo Frame: Jumbo frame size.

  • Page 46: Stp

    4.3.8 STP The Spanning Tree Protocol (STP) is a network protocol that ensures a loop-free topology for any bridged Ethernet local area network. 4.3.8.1 STP Global Setting To display STP Global Setting web page, click Switching > STP > STP Global Setting Enabled: Set the STP status to be enable/disable on the Switch.
  • Page 47 Port Select: Select the port list to specify which ports should apply this setting. External Path Cost: set the port’s contribution, when it is the Root Port, to the Root Path cost for the Bridge. (0 means `Auto`). Edge Port: Set the edge port configuration. No: Force to false state (as link to a bridge).
  • Page 48 Priority: Set the Bridge Priority in the specified CIST instance Max Hops: Set the value of the maximum number of hops in the region. Forward Delay: Set the delay time an interface takes to converge from blocking state to forwarding state. Max Age: Set the time any switch should wait before trying to change the STP topology after unhearing Hello BPDU.
  • Page 49 MSTI ID: Set the MSTI ID to specify the MST instance. VLAN List: Set the VLAN list. Priority: Set the bridge priority in the specified MST instance. 4.3.8.6 MST Port Setting To display MST Port Setting web page, click Switching > STP > MST Port Setting MST ID: Set the MSTI ID to specify MST instance.

  • Page 50: Mac Address Table

    4.4 Mac Address Table 4.4.1 Static Mac Setting To display Static Mac Setting web page, click Mac Address Table > Static Mac Setting MAC Address: The MAC address to which packets will be statically forwarded. If type is unicast, enter unicast MAC address in this field; if type is multicast, enter multicast MAC address in this field.

  • Page 51: Dynamic Address Setting

    MAC Address: The MAC address to which packets will be filtered. This must be a unicast MAC address. VLAN: The VLAN ID number of the VLAN on which the above MAC address resides. 4.4.3 Dynamic Address Setting To display Dynamic Address Setting web page, click Mac Address Table > Dynamic Address Setting This page is used to set the MAC address of the aging time to study Aging Time: Set the time needed for aging...

  • Page 52: Security

    4.5 Security Use the Security pages to configure settings for the switch security features. 4.5.1 Storm Control 4.3.5.1 Global Setting To display Global Setting web page, click Security > Storm Control > Global Setting Unit: Choose storm control unit is pps or bps Preamble &...

  • Page 53: 802.1X

    Port: Select the ports. Type Enable: Select the type of storm control. Broadcast: Broadcast packet.  Unknown Multicast: Unknown multicast packet.  Unknown Unicast: Unknown unicast packet.  Rate: Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting.
  • Page 54 4.5.2.2 802.1X Port Setting To display 802.1X Port Setting web page, click Security > 802.1X > 802.1X Port Setting Port: Select the ports to configure their authentication mode. Mode: The authentication mode. Force Unauthorized: Force this port to be unconditional unauthorized. ...

  • Page 55: Dhcp Snooping

    Reauthentication Enable: Set the enabling status of 802.1X reauthentication. Reauthentication Period: Set the reauthentication period of 802.1X if reauthentication is enabled. 4.5.5.1 Guest VLAN Setting To display Guest VLAN Setting web page, click Security > 802.1X > Guest VLAN Setting 4.3.5.1 Authenticated Hosts To display Authenticated Hosts web page, click Security >...
  • Page 56 discreditable ports. Creditable ports can receive and forward the DHCP Offer message, on the contrary, the discreditable port will lose the DHCP Offer message. In that way, the switch can pick out the fake DHCP Server and make sure that the client gets legal IP address from DHCP Server.
  • Page 57 4.5.3.4 Statistics To display Statistics web page, click Security > DHCP Snooping > Statistics This page shows statistics of each port´s DHCP Snooping state information. 4.5.3.5 Rate Limit To display Rate Limit web page, click Security > DHCP Snooping > Rate Limit...
  • Page 58 4.5.3.6 DHCP Option82 Global Setting To display DHCP Option82 Global Setting web page, click Security> DHCP Snooping > Option82 Global Setting This page is used to configure DHCP Snooping support Option82 strategy. 4.5.3.7 Option82 Port Setting To display Option82 Port Setting web page, click Security> DHCP Snooping > Option82 Port Setting To the specified port configuration of receiving containing Option 82 options request packet port handling strategy.

  • Page 59: Port Security

    4.5.3.8 Option82 Circuit-ID Setting To display Option82 Circuit-ID Setting web page, click Security> DHCP Snooping > Option82 Circuit-ID Setting This page allow user to edit circuit ID content in the option82. 4.5.4 Port Security To display Port Security web page, click Security> Port Security Ports Security can set port isolation and specific behavior.

  • Page 60: Aaa

    Port Select: Select one or multiple ports to configure. Security: Port security function. It constraint how many MAC addresses can be learned by a port and drop new one when reach the limitation. Enable: Enable port security function.  Disable: Disable port security function. ...
  • Page 61 Method 1: Select first priority of login authentication method. Local: Use local accounts database to authenticate.  Tacacs+: Use remote TACACS+ server to authenticate.  Radius: Use remote Radius server to authenticate. Not supported now, it will be supported in ...
  • Page 62 List Name: New enable authentication list name. This name should be different from other existing lists. Method 1: Select first priority of enable authentication method. Enable: Use local enable password to authenticate  Tacacs+: Use remote TACACS+ server to authenticate. ...

  • Page 63: Tacacs+ Server

    Method 1: Select first priority of exec accounting method. Tacacs+: Use remote TACACS+ server to accounting.  Radius: Use remote Radius server to accounting. Not supported now, it will be supported in  the future. Method 2: Select second priority of exec accounting method. Tacacs+: Use remote TACACS+ server to accounting.

  • Page 64: Access

    This page is used to set up radius server. 4.5.8 Access 4.5.8.1 Console To display Console web page, click Security > Access > Console This page allow user to combine all kinds of AAA lists to console line. The user accesses switch from console will be authenticated, authorized and accounted by AAA lists we combined here.
  • Page 65 EXEC Accounting List: Select one of the EXEC accounting lists we configured in “Accounting List” page. Session Timeout: Set session timeout minutes for user access CLI from console line. If user does not response after session timeout minute, CLI will logout automatically. 0 minutes means never timeout.
  • Page 66 HTTP Server：set HTTP Server disable or enable. Login Authentication List: Select one of the login authentication lists we configured in “Login List” page. Session Timeout: Set session timeout minutes for user access WEB from HTTP protocol. If user does not response after session timeout minute, WEB UI will logout automatically. 0 minutes means never timeout.

  • Page 67: Acl

    4.6 ACL 4.6.1 MAC-Based ACL To display MAC-Based ACL web page, click ACL > MAC-Based ACL This page allow user to set name for MAC-Based ACL. ACL Name: Enter ACL name in this field. 4.6.2 MAC-Based ACE To display MAC-Based ACE web page, click ACL > MAC-Based ACE This page allow user to set Based on MAC address expanding ACL list, matching corresponding MAC and setting the ports as drop or forward.

  • Page 68: Ipv4-Based Ace

    4.6.4 IPv4-Based ACE To display IPv4-Based ACE web page, click ACL > IPv4-Based ACE This page allow user to set based on IPv4 expanding ACL Peer Guardian and matching corresponding IP and setting the port as drop or forward. 4.6.5 ACL Binding To display ACL Binding web page, click ACL >...

  • Page 69: Qos

    4.7 QoS Use the QoS pages to configure settings for the switch QoS interface. 4.7.1 General 4.7.1.1 QoS Properties To display QoS properties web page, click QoS > General > QoS properties This page allow user to set QoS mode, basic or advanced. 4.7.1.2 Port Settings To display Port Settings web page, click QoS >...
  • Page 70 4.7.1.4 COS Mapping To display COS Mapping web page, click QoS > General > COS Mapping The page allow user to set QoS instance of COS Mapping. 4.7.1.5 DSCP Mapping To display DSCP Mapping web page, click QoS > General > DSCP Mapping The page allow user to set QoS instance of DSCP Mapping.

  • Page 71: Qos Basic Mode

    4.7.1.5 IP Precedence Mapping To display IP Precedence Mapping web page, click QoS > General > IP Precedence The page allow user to set QoS instance of IP Precedence Mapping. 4.7.2 QoS Basic Mode 4.7.2.1 Global Settings To display Global Settings web page, click QoS > QoS Basic Mode > Global Settings This page allow user to set QoS for trust mode on basic mode global settings.

  • Page 72: Qos Advanced Mode

    4.7.2.2 Port Settings To display Port Settings web page, click QoS > QoS Basic Mode > Port Settings This page allow user to set QoS port setting enabled or disabled. 4.7.3 QoS Advanced Mode 4.7.3.1 Global Settings To display Global Settings web page, click QoS > QoS Advanced Mode > Global Settings This page allow user to set the default QoS mode state under advanced mode global settings trust mode.
  • Page 73 4.7.3.2 Class Mapping To display Class Mapping web page, click QoS > QoS Advanced Mode > Class Mapping This page allow user to create a QoS class, which is used to link the ACL. 4.7.3.3 Aggregate Policer To display Aggregate Policer web page, click QoS > QoS Advanced Mode > Aggregate Policer 4.7.3.4 Policy Table To display Policy Table web page, click QoS >...
  • Page 74 4.7.3.5 Policy Class Maps To display Policy Class Maps web page, click QoS > QoS Advanced Mode > Policy Class Maps 4.7.3.6 Policy Binding To display Policy Binding web page, click QoS > QoS Advanced Mode > Policy Binding...

  • Page 75: Rate Limit

    4.7.4 Rate Limit 4.7.4.1 Ingress Port Settings To display Ingress Port Settings web page, click QoS > Rate Limit > Ingress Port Settings This page allow user to set ingress port monitor. 4.7.4.2 Ingress VLAN Settings To display Ingress VLAN Settings web page, click QoS > Rate Limit > Ingress VLAN Settings This page is used to set the bandwidth of the VLAN entry control.

  • Page 76: Management

    4.7.4.4 Egress Queue Settings To display Egress Queue Settings web page, click QoS > Rate Limit > Egress Queue Settings The page is used to set the egress lined up bandwidth monitor. 4.8 Management 4.8.1 LLDP LLDP is a one-way protocol; there are no request/response sequences. Information is advertised by stations implementing the transmit function, and is received and processed by stations implementing the receive function.
  • Page 77 4.8.1.1 LLDP Global Settings To display LLDP Global Settings web page, click Management > LLDP > LLDP Global Settings Enabled: Enable/ Disable LLDP protocol on this switch. Transmission Interval: Select the interval at which frames are transmitted. The default is 30 seconds, and the valid range is 5–32768 seconds.
  • Page 78 Port Select: Select specified port or all ports to configure transmission state. State: Select the transmission state of LLDP port interface. Disable: Disable the transmission of LLDP PDUs.  RX Only: Receive LLDP PDUs only.  TX Only: Transmit LLDP PDUs only. ...
  • Page 79 4.8.1.5 LLDP Network Policy To display LLDP Network Policy web page, click Management > LLDP > LLDP Network Policy 4.8.1.6 MED Port Setting To display MED Port Setting web page, click Management > LLDP > MED Port Setting...

  • Page 80: Snmp

    4.8.1.7 LLDP Overloading To display LLDP Overloading web page, click Management > LLDP > LLDP Overloading 4.8.2 SNMP 4.8.2.1 SNMP Setting To display SNMP Setting web page, click Management > SNMP > SNMP Setting State: SNMP daemon state Enabled: Enable SNMP daemon ...
  • Page 81 4.8.2.3 SNMP Access Group To display SNMP Access Group web page, click Management > SNMP > SNMP Access Group This page is used to configure SNMP group, within the group the user can set read-only or write only. 4.8.2.4 SNMP Community To display SNMP Community web page, click Management >...
  • Page 82 4.8.2.5 SNMP User To display SNMP User web page, click Management > SNMP > SNMP User This page is used to create SNMP user under the group and the group with the same level of security and access control permissions. 4.8.2.6 SNMPv1,2 Notification Recipients To display SNMPv1,2 Notification Recipients web page, click Management >...
  • Page 83 4.8.2.7 SNMPv3 Notification Recipients To display SNMPv3 Notification Recipients web page, click Management > SNMP > SNMPv3 Notification Recipients 4.8.2.8 SNMP Engine ID To display SNMP Engine ID web page, click Management > SNMP > SNMP Engine ID...

  • Page 84: Rmon

    4.8.2.9 SNMP Remote Engine ID To display SNMP Remote Engine ID web page, click Management > SNMP > SNMP Remote Engine ID 4.8.3 RMON 4.8.3.1 RMON Statistics To display RMON Statistics web page, click Management > RMON > RMON Statistics 4.8.3.2 RMON Event To display RMON Event web page, click Management >...
  • Page 85 4.8.3.3 RMON Event Log To display RMON Event Log web page, click Management > RMON > RMON Event Log 4.8.3.4 RMON Alarm To display RMON Alarm web page, click Management > RMON > RMON Alarm This page is used to configure RMON statistics group and alarm group. 4.8.3.5 RMON History To display RMON History web page, click Management >...

  • Page 86: Diagnostics

    4.8.3.6 RMON History Log To display RMON History Log web page, click Management > RMON > RMON History 4.9 Diagnostics Use the Diagnostics pages to configure settings for the switch diagnostics feature or operating diagnostic utilities. 4.9.1 System Status To display System Status Log web page, click Diagnostics > System Status 4.9.2 Ping Test To display Ping Test Log web page, click Diagnostics >...

  • Page 87: Logging Setting

    IP Address: The IP address of ping target. Count: How many times to send ping request packet. Interval: Time interval between each ping request packet. Size: The size of ping packet. Ping Results: After ping finished, results will show in this field. 4.9.3 Logging Setting 4.9.3.1 Logging Service To display Logging Service web page, click Diagnostics >...

  • Page 88: Factory Default

    Target: Select the target to store log message RAM: Store log messages in RAM disk. All log messages will disappear after system reboot.  FLASH: Store log messages in FLASH. All log messages will not disappear after system  reboot. Severity: Select severity of log messages, which will be stored.

  • Page 89: Maintenance

    4.10 Maintenance Use the Maintenance pages to configure settings for the switch network interface, and how the switch connects to a remote server to get services. 4.10.1 Backup Manager To display Backup Manager web page, click Maintenance > Backup Manager This page allow user to backup the firmware image or configuration file on the switch to remote TFTP server or host file system through HTTP protocol.

  • Page 90: Upgrade Manager

    4.10.2 Upgrade Manager To display Upgrade Manager web page, click Maintenance > Upgrade Manager This page allow user to upgrade new firmware image or configuration file to the switch from remote TFTP server or select file from web browser. Upgrade Method: Select upgrade method TFTP: Use TFTP to upgrade ...

  • Page 91: Account Manager

    4.10.4 Account Manager To display Account Manager web page, click Maintenance > Account Manager This page allow user to add or delete switch local user database for authenticating. User Name: User name for new account. Password Type: Select password type for new account. Clear Text: Password without encryption ...

  • Page 92: Enable Password

    Password: If the password type is not “No Password”, the password must be specified. Retype Password: Retype password to make sure the password is exactly you typed before in “Password” field. Privilege Type: Select privilege level for new account. Admin: Allow to change switch settings. ...
  • Page 93 Hinweis: Bei falscher Installation und unsachgemäßem Gebrauch im Wohnbereich kann das Gerät Störungen bei Rundfunkgeräten und anderen elektronischen Geräten verursachen. Ein sachgemäßer Gebrauch liegt vor, wenn das Gerät, soweit durchführbar, mit geschirmten Anschlusskabeln betrieben wird (bei Netzwerkprodukten zusätzlich geschirmter Kabel der Kategorie 5e und höher).

This manual is also suitable for:

Dn-80211-1Dn-80221-1

Table of Contents