When Sel Is Full; Bmc Network Configuration; Ipmi Lan Selection; Ipmi Network Link Status - Supero X10SRW-F User Manual

Table of Contents

X10SRW-F User's Manual

When SEL is Full

This feature allows the user to determine what the BIOS should do when the sys-

tem event log is full. Select Erase Immediately to erase all events in the log when

the system event log is full. The options are Do Nothing and Erase Immediately.

Note: After making changes on a setting, be sure to reboot the system for

the changes to take effect.



The following items will be displayed:

This item displays the IPMI LAN setting. The default setting is Failover.

This item displays the IPMI Network Link status. The default setting is Shared LAN.

Select Yes for the BIOS to implement all IP/MAC address changes at the next

system boot. The options are No and Yes

Use this item to select the source of the IP address for this computer. If Static is

selected, you will need to know the IP address of this computer and enter it to the

system manually in the field. If DHCP is selected, the BIOS will search for a DHCP

(Dynamic Host Configuration Protocol) server in the network that is attached to

and request the next available IP address for this computer. The options are DHCP

and Static.

The following items are assigned IP addresses automatically if DHCP is selected,

or they can be configured manually if Static is selected.

Station IP Address

This item displays the Station IP address for this computer. This should be in decimal

and in dotted quad form (i.e., 192.168.10.253).

Subnet Mask

This item displays the sub-network that this computer belongs to. The value of each

three-digit number separated by dots should not exceed 255.

Station MAC Address

This item displays the Station MAC address for this computer. Mac addresses are

6 two-digit hexadecimal numbers.

4-36

Table of Contents