Removing And Installing The Processor - Clevo P770ZM Service Manual

Removing and Installing the Processor

Processor Removal Procedure
1. Turn off the computer, remove the battery
2. Remove screws - from the heat sink unit in the order indicated on the label (i.e screw
1 8
screw last Figure 11a)
.
1
3. Carefully (it may be hot) remove the heat sink unit
a.
6
5
b.
9
(page 2 - 5), and component bay cover
( Figure 11b).
9
8
3
2
1
4
7
(page 2 - 11).
first through to
8
Note:
Loosen the screws in the reverse
order 8-7-6-5-4-3-2-1 as indicated.
Removing and Installing the Processor 2 - 15
Disassembly
Figure 11
Processor
Removal
Procedure
a. Remove the screws
in the correct order.
b. Carefully remove
the heat sink unit.

9. Heat Sink Unit
• 8 Screws