Removing The M.2 Ssd Module - Clevo P770ZM Service Manual

Disassembly

Removing the M.2 SSD Module

Figure 6
Note that the SSD (if installed) is beside the HDD bay.
M.2 SSD Module
Removal
1. Turn off the computer, and turn it over, remove the battery
2. Remove the screw
a. Remove the screws.
3. The M.2 SSD module
b. The module will pop up.
4. Lift the M.2 SSD module
c. Lift the module out.
5. Reverse the process to install a new SSD (make sure that the hexagonal screw
depending upon the size of the module).
a.

2. M.2 SSD Module
• 1 Screw
2 - 10 Removing the M.2 SSD Module
from the SSD (Figure 6a
1
will pop-up (Figure 6b
2 6
up and off the computer
2
6
b.
c.
1
(page 2 - 5).
) .
)
.
(Figure 6c ) .
2
2
3
3
is in the correct location
3