When Pictbridge Printing Does Not Work - Ricoh SP C260DNw User Manual

3. Printing Documents
2. Disconnect the USB cable from the machine.

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can occur during PictBridge
printing.
Problem
PictBridge is not available.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
Cannot print.
68
Cause
There is a problem with the USB
connection or the PictBridge
settings.
You have connected multiple
digital cameras.
The specified number of prints
exceeds the maximum number
that can be printed at a time.
Solution
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
Connect one digital camera
only.
Do not connect multiple
cameras.
The maximum specifiable print
quantity at a time is 999.
Change the quantity to 999 or
less, and then retry printing.