Specifying Paper Type And Paper Size Using The Control Panel; Specifying The Paper Type - Ricoh SP C261SFNw User Manual

Specifying Paper Type and Paper Size Using
the Control Panel
This section describes how to specify the paper size and paper type using the control panel.
• Paper type and size can also be specified using the printer driver. For details, see the printer driver
Help.
• For prints from the bypass tray or Tray 1, you can select to print according to either the printer
driver settings or the control panel settings with [Bypass Tray Priority] under [Paper Settings]. For
details about [Bypass Tray Priority], see page 250 "Paper Settings".
• If [Auto Continue] under [System Settings] is enabled, printing stops temporarily if a paper type/
size error is detected. The printing restarts automatically with the settings made with the control
panel after about ten seconds. For details about [Auto Continue], see page 238 "System Settings".

Specifying the Paper Type

This section describes how to specify the paper type.
1. Press the [Home] key.
2. Press the [Setting] icon on the [Home] screen.
3. Press [Paper Settings].
4. Select the tray for which you want to specify the paper type.
5. Select the desired paper type.
6. Press the [Home] key.

Specifying Paper Type and Paper Size Using the Control Panel

DUE302
57