When Pictbridge Printing Does Not Work - Ricoh Aficio SP C232DN Operating Instructions Manual

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can
occur when PictBridge printing.
Problem
PictBridge is not available.
When two or more digital
cameras are connected, the
second and subsequent cam-
eras are not recognized.
Printing is disabled.
Printing is disabled.
Printing is disabled.
Cause
There is a problem with the
USB connection or the Pict-
Bridge settings.
You have connected multiple
digital cameras.
The specified number exceeds
the maximum number that
can be printed at a time.
There is no paper of the speci-
fied size remaining.
The paper size setting for this
tray cannot be printed on the
printer.
When PictBridge Printing Does Not Work
Solution
Use the following procedure
to check the connection and
settings:
A
Disconnect and then recon-
nect the USB cable.
B
Check the PictBridge set-
tings are enabled.
C
Disconnect the USB cable,
and then turn off the print-
er. Turn the printer back
on. When the printer has
fully booted up, reconnect
the USB cable.
Connect one digital camera
only.
Do not connect multiple cam-
eras.
The maximum specifiable
print quantity at a time is 999.
Respecify the quantity to 999
or less, and then retry printing.
There is no paper of the speci-
fied size remaining.
If you have to use paper that is
not of the specified size, per-
form Form Feed. To cancel
printing, perform Job Cancel.
Select the paper size setting
that can be printed on the
printer.
4
41