Kyocera ECOSYS M3860idn Operation Manual page 443

Appendix > Optional Equipment
(1) Card Authentication Kit(B) "Card Authentication Kit"
User login administration can be performed using ID cards. To do so, it is necessary to register ID card information on the
previously registered local user list. For more information about how to register this information, refer to the following:
Card Authentication Kit(B) Operation Guide
(2) PF-3110 "Paper Feeder (500-sheet x1)"
Up to four additional cassettes identical to the machine's cassettes can be installed in the machine. Loading method are
the same as the standard cassettes.
Loading in the Cassettes (page 3-4)
(3) CA-3100 "Castor kit"
If you are attaching Paper Feeder (500-sheet x1) to the printer and installing it on the floor, you can use the castor kit to
maintain the machine's stability.
(4) MS-5100B "Manual stapler" (ECOSYS M3860idn only)
It can staple the originals or the printouts. The number of sheets that can be stapled together is 20 sheets (80 g/m
(5) "SD/SDHC Memory Card"
An SD/SDHC memory card is useful for storing fonts, macros, and overlays. The machine is equipped with a slot for an
SDHC memory card with a maximum size of 32 GB, and an SD memory card with a maximum size of 2 GB.
Reading the SD/SDHC Memory Card
Once inserted in the machine's slot, the contents of the SD/SDHC memory card can be read from the operation panel or
automatically when you power on or reset the machine.
Installing and Formatting the SD/SDHC Memory Card
To use an unused SD/SDHC memory card, you must first use the machine to format the SD/SDHC memory card. For
information on formatting an SD/SDHC memory card, consult your Service Representative.
1
Power off the machine and unplug the power cord.
2
Remove the cover.
11-4
2
).