Sending Documents In A Custom Box - Kyocera ECOSYS M3860idn Operation Manual

Operation on the Machine > Using a Custom Box

Sending Documents in a Custom Box

1
2
Display the screen.
Select [Custom Box] on the Home screen > Select the box.
NOTE
If a custom box is protected by a password, enter the correct password.
Send Start.
1
Select the document in the list that you want to send by selecting its checkbox.
The document is marked with a checkmark.
NOTE
• You cannot select and send multiple documents.
• To cancel a selection, select the checkbox again so that it is no longer ticked.
2
[Menu] > [Send]
NOTE
Depending on the settings, the address book screen may appear.
3
Set the destination.
For more information on selecting destinations, refer to the following:
Specifying Destination (page 5-20)
4
Specify the file type, resolution, and other settings as desired.
For the features that can be set, refer to the following:
Sending Documents (page 6-7)
NOTE
For information about registering a shortcut or recalling a favorite, refer to the information
below.
Registering Shortcuts (page 5-14)
Favorites (page 5-6)
5
Press the [Start] key.
Sending of the selected document begins.
5-47