Wireless Lan Menu - Epson EB-590WT User Manual

List of Functions
Sub-menu
Projector Key‐ When set to On, you have to enter the keyword when you try to
word connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
EasyMP Network Projection Operation Guide
s
EasyMP Multi PC Projection Operation Guide
s

Wireless LAN Menu

Sub-menu
Turn On when connecting the projector to the computer over
Wireless LAN
wireless LAN.
Power
If you do not want to connect via wireless LAN, turn it Off to
prevent unauthorized access by others.
This is set to On by default.
Function
Function
Sub-menu
Connection Set the connection mode to use when connecting the projector
Mode and a computer via a wireless LAN.
If you select Quick (default), a small network is created
automatically by the projector and computer. Used in
combination with EasyMP Network Projection. When SSID
Auto Setting is set to On, the projector becomes an easy access
point. When set to Off, the network is created in Ad hoc
g
mode .
If you select Advanced, the connection is established in
infrastructure mode
See the following manual for details on Connection Mode.
EasyMP Network Projection Operation Guide
s
EasyMP Multi PC Projection Operation Guide
s
(This can only be set if Connection Mode is set to Quick.)
Channel
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
(This can only be set if Connection Mode is set to Quick.)
SSID Auto Set‐
ting
Set to On to speed up the projector search.
Set to Off when connecting to multiple projectors at the same
time.
This is set to On by default.
(This can be set only if SSID Auto Setting is set to Off.)
SSID
g
Enter an SSID . When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters. If
the SSID is left blank or set to ANY, an ANY connection (selects a
connection from local access points without specifying an SSID)
is established.
Function
g
through the access point installed.
139