Rear - Epson EB-590WT User Manual

Part Names and Functions

Rear

Name
A
Diffuses laser light to detect the position of fingers.
Laser diffusion port
B
Magnet used for installation.
Installation magnet
C
Marker Place the markers on the screen when performing angle
adjustment.
Warning
• Follow the steps in the Installation Guide to install the Touch Unit. If this is
not installed correctly, it could cause damage to your eyes due to the
powerful light emitted.
• Do not use the Touch Unit near medical equipment such as pace makers.
Furthermore, when using the Touch Unit, make sure there is no medical
equipment such as pace makers, in the surrounding area. Electromagnetic
interference may cause medical equipment to malfunction.
Function
Caution
• Do not use the Touch Unit near magnetic storage media such as magnetic
cards, or precision electronic devices such as computers, digital watches, or
cell phones. Data could be corrupted or a malfunction could occur.
• When installing the Touch Unit on a magnetic surface, be careful not to trap
your fingers or any other part of your body between the magnet and the
installation surface.
Attention
• Do not connect the Touch Unit to any devices except for EB-595Wi. The
device could malfunction, or laser light could leak beyond the limit.
• Make sure you use the supplied Touch Unit connection cable. Operations are
not possible with a commercially available cable.
• When disposing of the Touch Unit, do not disassemble it. Dispose according
to your local or national laws and regulations.
a
See the Installation Guide for the Touch Unit installation methods and
angle adjustment methods.
Installation Guide
s
24