No Sound Can Be Heard From The Microphone; There Is Noise In The Audio (Only When Projecting Usb Display) - Epson EB-590WT User Manual

Problem Solving
Check
Is the Mic Input Level set at the maximum?
Is A/V Mute active?
Is the audio cable's specification "No resistance"?
Is it connected with an HDMI cable?
Is Output audio from the projector selected?
(Only when projecting USB Display)
Is the correct audio input selected?

No Sound Can Be Heard from the Microphone

Check
Is the microphone connected correctly?
Is the microphone input volume turned down too low?
Are you using a plug-in power type microphone?

There Is Noise in the Audio (only when Projecting USB Display)

Check
Is the volume for the computer set to minimum while the projector's
volume is set to maximum?
Lower the Mic Input Level.
s Settings - Mic Input Level p.131
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
When using a commercially available audio cable, make sure it is labeled "No resistance".
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select
the Output audio from the projector checkbox.
Check the Audio Output, HDMI1 Audio Output, and HDMI2 Audio Output settings from the Configuration menu.
s Extended - A/V Settings p.132
Disconnect the cable from the Microphone (Mic) port, and then reconnect the cable.
s "Connecting a Microphone" p.37
Adjust the microphone input volume so that sound can be heard.
s Settings - Mic Input Level p.131
The projector does not support plug-in power type microphones. Use a commercially available dynamic microphone.
s Settings - Mic Input Level p.131
The audio may contain noise if the volume for the computer is set to minimum while the projector's volume is set to
maximum. Increase the volume for the computer, and decrease the volume for the projector.
s Settings - Volume p.131
Remedy
p.102
Remedy
Remedy
166