Security Menu - Epson EB-590WT User Manual

List of Functions
Sub-menu
IP Settings (This can be set only if Connection Mode is set to Advanced.)
You can make network settings.
DHCP: Set to On to make network settings using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can input the IP address
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the subnet mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display To prevent the SSID
screen, set this to Off.
To prevent the IP address
IP Address Dis‐
Standby screen, set this to Off.
play
Function
g
. If this
g
assigned to the
g
for the projector.
g
from being displayed on the LAN Standby
g
from being displayed on the LAN

Security Menu

Sub-menu
g
Select the security type from the items that are displayed.
Security
When setting security, follow the instructions from the
administrator of the network system you are about to access.
Passphrase (This can only be selected when Security is set to WPA2-PSK or
WPA/WPA2-PSK.)
Enter the passphrase. You can enter at least 8 and up to 63 single-
byte alphanumeric characters.
When using with EasyMP Network Projection, you do not need
to enter the passphrase in the computer if it is the initial (default)
passphrase.
s "Reset Menu"
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.114
When Connection Mode is set to Quick, the initial passphrase is
set.
Function
p.144
140