Setting Up The Touch Unit (Eb-595Wi Only) - Epson EB-590WT User Manual

Installing the Projector
a
• When using the interactive features, install so that the projected
screen is a rectangle without any distortion.
• When using the interactive features in the same room as multiple
projectors, interactive pen operations may become unstable. In this
situation, connect the optional remote control cable set (ELPKC28)
to the projectors, and change Sync of Projectors to Wired from the
Configuration menu.
s "Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi
only)" p.42
s Extended - Easy Interactive Function - Advanced - Sync of
Projectors p.135

Setting up the Touch Unit (EB-595Wi only)

When using the Touch Unit, install the projector using one of the following
methods. The Touch Unit cannot be used if another installation method is
used.
• Mount the projector on a wall or suspend it from a ceiling and project
images from in front of the screen (when suspending the projector from
a ceiling, the optional ceiling mount (ELPMB23) is required)
• Install vertically on a desk and project from the front of the desk (the
optional interactive table mount (ELPMB29) is required)
"Optional Accessories" p.184
s
28