Replacing The Remote Control Batteries - Epson EB-590WT User Manual

Part Names and Functions
Name
• Stops the current function.
T
[Esc] button
• If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu"
• Acts as a mouse's right button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)"
U
[Pen Mode] button Changes between operating the computer or drawing
using the interactive pen.
s "Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)"
V
Each time the button is pressed, the color mode changes.
[Color Mode] button
s "Selecting the Projection Quality (Selecting Color
Mode)"
W
[MHL Menu] button Displays the settings menu for the device linked to the
projector's MHL port.
X
Switches to the image from the network connected device.
[LAN] button
Y
[USB] button Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB-A port
Z
Switches to the image from the input port where video
[Source Search]
button signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
a
Outputs remote control signals.
Remote control light-
emitting area
Function
p.125
p.104
p.64
p.60
p.46

Replacing the Remote Control Batteries

If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
Safety Instructions
s
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old battery with a new battery.
Slide the batteries in negative side first.
19