Mounting The Lift To The Track - Handicare 960-117 Owner's Manual

Mounting the lift to the track

The first step in being able to use the
There are several ways of making this connection. Refer to figures 8A through to 11B to determine the type of
ceiling connection that has been installed with the purchased system.
Caution: Always check to ensure that the lift hook is attached properly to the eyelet of the trolley, or
the reacher, or the lanyard. The safety latch of the lift hook must always be in a locked position as
shown in the close-up photos 8B, 9B, 10B and 11A.
Option 1 - Direct connection to trolley
Figure 8A - Photo showing con-
nection of lift hook directly to
the eyelet of the trolley.
Option 3 - Connection with lanyard
Lanyard
Figure 10A - Photo of lift hook
P-600
connected to a lanyard
first and then to the eyelet of
the trolley.
P600 Lift- User Guide (753102)
P-600
lift is to mount it onto the trolley of the lift track.
Eyelet
of
Trolley
trolley
Lift hook
Figure 8B - Photo showing close-
up of lift hook connected directly
to eyelet of trolley.
Eyelet of
trolley
Lanyard
Lift Hook
Figure 10B - Photo showing
close-up of lift hook, lanyard and
eyelet of trolley.
Rev: 14 MAR 2017
Option 2 - Connection with reacher
Reacher
Figure 9A - Photo showing P-600
lift carabiner connected to a reacher
first and then to the eyelet of the
trolley.
Option 4 - Connection with lanyard and
Reacher arm Carabiner.
Lanyard
Figure 11A - Photo showing lift
hook connected to a reacher &
lanyard and finally to the eyelet
of the trolley.
Eyelet of trolley
Reacher
Arm
Lift
Hook
Figure 9B - Photo showing close
up of P-600 lift carabiner con-
nected to a reacher first and then
to the eyelet of the trolley.
Carabiner
Page: 10