Table of Contents
Advertisement
LCD Display Functionality
Default Display Mode:
The lift unit displays the battery charge level:
1. Battery Level (the factory setting for the Default Display Mode); or,
2. Indicates direction in which the lift is moving (UP/DOWN)
In Battery Level Mode the lift will:
1. Display the word, "Battery", with the percentage charged (in 10% increments) in the top
row of the display (e.g., "Battery Level 60%").
Display a "Bar Graph" of the battery level in the second row of the display by displaying
2.
the appropriate number of fully blackened rectangles as in the following diagram:
B a t
Note: As the lift is initially switched on, the level of battery charge displayed may be
incorrect. However, as soon as the lift is actually operated, the charge level will up date to
the correct level.
If the battery levels fall below 25%, the lift will go into Low Battery Mode. The lift will then:
4. Make an audible beeping sound every ten (10) seconds.
5. Flash "Low Battery" in the first line.
6. The bars indicating charge level will flash on and off.
When the "UP" button on the hand control or the lift is pressed the display will show "UP"
When the "DOWN" button on the hand control or the lift is pressed the display will show "DOWN"
When the Lift has reached the top of the lifting range, the lift displays "UP LIMIT SWITCH"
U p
P600 Lift- User Guide (753102)
t
e r y
5
0
U
P
D O
W
N
L i m _
S
w !
Rev: 14 MAR 2017
%
Page: 17
Advertisement
Table of Contents
