TP-Link TD-W8961N Quick Installation Manual

Quick Installation Guide
300Mbps Wireless N ADSL2+ Modem Router
TD-W8961N
Connecting the Hardware
If you don't need the phone service, just skip step 1 and directly
connect the modem router to the phone jack with a phone cable,
then follow steps 3 and 4 to complete the hardware connection.
1
Connect the ADSL splitter to the
phone jack.
Phone Jack
ADSL Splitter
Power Adapter
2
Connect the modem router
to the ADSL splitter.
Connect to the phone (Optional)
N 2
L A
N 3
L A
i
W iF
N 4
L A
S / 3
W P
T
S E Turn on the modem
R E
F
/O F
O N
W E R router.
P O
Modem Router
4
Verify that the hardware connection
is correct by checking these LEDs.
Power
On
Notes
1. The ADSL LED
minutes to stabilize.
2. If the Wireless LED
the WiFi button on the rear panel for 2
seconds, then the LED should turn stable
in a few seconds.
S L
A D
N 1
L A
ADSL Wireless
On On/Flashing
takes about 1 to 2
is off, please press