Preset Position Tab - Saving Pan/Tilt/Zoom Position; Serial Tab - Sony SRG-300SE Ipela User Manual

Preset position Tab
— Saving pan/tilt/zoom position
You can set up camera pan, tilt, and zoom positions to
256 positions. You can also store the camera settings in
the preset positions from 1 to 16 through operation from
the remote controller. For details, see "Operation Using
the Remote Controller" - "Storing the Camera Settings
in Memory — Presetting Feature" on page 49.
You can also store the camera settings in the preset
positions from 1 to 16. If you want to store only the
position of pan/tilt/zoom, use the preset positions 17 to
256. For details of the camera settings to be preset, see
"Preset Items" on page 62.
Notes
• If the camera settings are not stored in Preset 1, the
camera settings are cleared from the memory and reset
to the default settings when the power is turned on. For
the setting items and actions that are retained in the
memory, see "Preset Items" on page 62.
• Even if the DISPLAY INFO is set to ON in
"SYSTEM Menu" (page 56), the setting condition is
not output to the SDI output.
Preview screen
This screen is for monitoring images and setting preset.
Set
Click to save a selected position, such as pan, tilt or
zoom positions in the preset. You can also store the
camera settings in the preset positions from 1 to 16. For
the setting items that can be stored, see "Preset Items"
on page 62.
42
Setting the PTZF control — PTZF control Menu
Call
Move to the pan, tilt and zoom positions saved in the
selected preset. You can also call the stored camera
settings from the preset positions 1 to 16.
Add
Save the current pan, tilt and zoom positions as a new
preset. You can also store the camera settings in the
preset positions from 1 to 16. For the setting items that
can be stored, see "Preset Items" on page 62.
Remove
Delete the selected preset items and return the stored
settings to the factory settings. For the setting items
stored in each preset setting, see "Preset Items" on
page 62.
Rename
Change the name of a selected preset.
Thumbnail
Check this checkbox to registers a thumbnail.
Select a radio button to determine whether to register the
current camera image as a thumbnail or to register with
a specified image.
To specify an image, click Browse....
Note
A thumbnail cannot be registered with the operation
using the remote controller. When switching the Eflip
function On/Off in the Installation tab of System menu,
all preset settings are deleted.
OK/Cancel
See "Buttons common to every menu" on page 18.

Serial Tab

Set the communication setting of the VISCA RS-422
connector.
Baud rate
Set the communication speed when the VISCA RS-422
connector and an external device are connected.