Furuno SC-60 Operator's Manual page 79

APPENDIX B
Installation of Antenna Unit SC-603
B.1 Mounting Considerations
See the mounting considerations on page 2-1 to select a suitable mounting
location. (The drawings are for the antenna unit SC-303, but the guidelines are
the same.)
B.2 Installing the Antenna Unit
1. Screw in three antenna elements in the Antenna Base S. Remove Antenna
Cover S and Arm cover S.
2. Pass the coaxial cable from each antenna element through the center of the
respective arm and then through the hole at the center of the antenna unit.
3. Orient the three antenna elements so that the protrusion on each faces the
bow.
Nut
Arm Cover S
Antenna Cover S
3
Arm Cover S
(Below arm)
Antenna Base S
Antenna unit SC-603
Orient the three antenna
elements so the protrusion
on each faces the bow.
How to orient the antenna elements
2
Antenna
Element
1
BOW
B-1