2. INSTALLATION
The unit can be oriented as shown in the figure below. After the unit is
installed you will specify the mounting method from the menu.
Mounting Method: "Wall"
Mounting Direction: D
7. Fasten the ground wire between the ground terminal on the processor unit
and the ship's superstructure.
2.3.3
Installation on the underside of a desk
The processor unit may be mounted on the underside of a desk as shown in the
figure below. Do not install it on the overhead.
2-12
Reference Direction
Direction D
(Bulkhead)
Processor unit orientation, bulkhead mounting
Installation of processor unit on the underside of a desk
Bulkhead
Mount processor unit so
reference direction is within
± 2.5 of fore-and-aft line.
Name Plate (other side)
Mounting Method: "Wall"
Direction
A
Mounting Direction: A
Direction B
Mounting Method: "Wall"
Mounting Direction: B
Direction
C
Mounting Method: "Wall"
Mounting Direction: C
Desk
Name Plate
(Bulkhead)
(Bulkhead)
(Bulkhead)