Bulkhead Mount - Furuno SC-60 Operator's Manual

2. INSTALLATION
2.3.2

Bulkhead mount

For mounting on a bulkhead, use the bulkhead mounting plate supplied with the
installation materials.
1. Unfasten four screws from the top cover to open the front panel.
2. Unfasten two screws to dismount the angular rate sensor.
3. Fasten the bulkhead mounting plate to the angular rate sensor. Align the
center graduation on the sensor with the hole of the bulkhead mounting plate
and tighten fixing screws.
Center Mark
2-10
Angular Rate Sensor
Processor unit, top view
Scale
Angular rate sensor, top view
20P8171
Hole of bulkhead
mounting plate
Angular Rate Sensor
Mounting Base
Fixing Screw