Furuno SC-60 Operator's Manual page 83

7. Make a loop in the antenna cable as shown in the illustration below. Fasten
the antenna cable to the antenna mast with cable ties.
Coat with Three
Bond 1211 (supplied).
8. Coat bolt threads and nuts at the bottom of each antenna element with Three
Bond 1211.
9. Paint pedestal and support plate with anti-corrosive paint.
10. If necessary, attach the "bird-repellent fixtures" (supplied) to each antenna
element and the Antenna Cover S as shown below.
Fix antenna cable
to mast with
cable ties.
Fastening the antenna cable
Antenna element
Coat bolt threads with
Three Bond and then coat
nuts with the Three Bond.
Bird-repellent fixture
APPENDIX B
B-5