Status Menu Error Codes - Epson Workforce Pro WF-R5690 User Manual

Status Menu Error Codes

If a job does not complete successfully, you can check the error code on the product control panel. Press
the Status button, select Job History, and locate the incomplete job. Select the job to display the error
code and additional information.
Code
001
101
102
103
104
106
107
108
109
110
111
201
202
Condition/solution
The product was turned off by a power failure. Resend the job.
Memory is full. Reduce the size of the print job.
Collated printing has failed due to a lack of available memory. Clear fonts and macros
from the product's memory by selecting Setup > System Administration > Clear
Internal Memory Data > Clear Font and Macro. You can also try reducing the size of
the print job or print one copy at a time.
Print quality was decreased due to a lack of available memory. If the quality of the printout
is unacceptable, try simplifying the page by reducing the number of graphics or the
number and size of the fonts.
Reverse printing has failed due to a lack of available memory. Clear fonts and macros
from the product's memory by selecting Setup > System Administration > Clear
Internal Memory Data > Clear Font and Macro. You can also try reducing the size of
the print job.
Cannot print from the computer due to access control settings. Contact your network
administrator.
User authentication failed and the job has been canceled. Contact your network
administrator.
Confidential job data was deleted when the product was turned off.
The received fax was already deleted.
The job was printed 1-sided because the loaded paper does not support 2-sided printing.
Available memory is running low. Reduce the size of the print job.
The product's memory is full. You can send pages individually, or print received faxes and
delete them to free up memory space.
The line was disconnected by the recipient's fax machine. Wait a moment, then try again.
324