Status Menu Error Codes - Epson WF-R4640 User Manual

Related references
Where to Get Help
Related tasks
Checking for Software Updates
Selecting the Line Type
Connecting a Telephone or Answering Machine
Related topics
Wi-Fi or Wired Networking
Replacing Ink Supply Units (Ink Packs) and Maintenance Boxes

Status Menu Error Codes

If a job does not complete successfully, you can check the error code on the product control panel. Press
the Status button, select Job History, and locate the incomplete job. Select the job to display the error
code and additional information.
Code
001
101
103
106
107
108
109
110
111
201
202
Condition/solution
The product was turned off by a power failure. Resend the job.
Memory is full. Reduce the size of the print job.
Print quality was decreased due to a lack of available memory. If the quality of the printout
is unacceptable, try simplifying the page by reducing the number of graphics or the
number and size of the fonts.
Cannot print from the computer due to access control settings. Contact your network
administrator.
User authentication failed and the job has been canceled. Contact your network
administrator.
Confidential job data was deleted when the product was turned off.
The received fax was already deleted.
The job was printed 1-sided because the loaded paper does not support 2-sided printing.
Available memory is running low. Reduce the size of the print job.
The product's memory is full. You can send pages individually, or print received faxes and
delete them to free up memory space.
The line was disconnected by the recipient's fax machine. Wait a moment, then try again.
281