Lexmark 4021 User Manual page 186

Clearing jams
•
Area H10
6
Push the booklet maker back into place.
7
Close door H.
8
Open door C, and then remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Notes:
•
Make sure that door C does not hit any cable attached to the printer.
•
Make sure that all paper fragments are removed.
•
If the 3000‑sheet tray is installed, then slide the tray to the right to open the door.
9
Close door C.
186