Lexmark 4021 User Manual page 108

Understanding the printer menus
Use
Hole Punch Mode
2 holes
3 holes
4 holes
Duplex Binding
Long Edge
Short Edge
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
To
Specify the number of holes to be made on the prints.
Notes:
•
"3 holes" is the U.S. factory default setting. "4 holes" is the international
factory default setting.
•
This menu appears only when a supported staple, hole punch finisher is
installed.
Define the way duplexed pages are bound and printed.
Notes:
•
Long Edge assumes binding along the long edge of the page (left edge
for portrait and top edge for landscape). This is the factory default setting.
•
Short Edge assumes binding along the short edge of the page (top edge
for portrait and left edge for landscape).
Specify the orientation of a multiple‑page document.
Notes:
•
Auto is the factory default setting.
•
This setting affects jobs if the value of the Paper Saver setting in the
same menu is not set to Off.
Specify that multiple‑page images be printed on one side of a paper.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per
side.
Print a border on each page image when using N‑Up (pages per side).
Notes:
•
None is the factory default setting.
•
This setting affects jobs if the value of the Paper Saver setting in the
same menu is not set to Off.
Specify the positioning of multiple‑page images when using N‑Up (pages per
side).
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they
are in portrait or landscape orientation.
•
This setting affects jobs if the value of the Paper Saver setting in the
same menu is not set to Off.
108