Basic Operations; Power On; Power Off (Standby State); Vol (Volume) - Fujitsu Plasmavision P42XTA51US User Manual

BASIC OPERATIONS

Power ON

Turn "ON" the power.
1 
Press .
The power is turned on, and the power lamp changes
from "Red" to "Green."
Select the Video, RGB, or TV mode to
enable ordinary operation.
* Make sure that the power cord is connected to a 3-
core receptacle in advance. (See P. E-11 of "BASIC
CONNECTION AND PREPARATION OF THE
SYSTEM")

Power OFF (standby state)

Turn "OFF" the power (the plasma display placed in
standby state).
1

Press when the power is "ON."
The power lamp changes from "Green" to "Red" and the
plasma display becomes the standby state.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions may not be available depending on the model or optional equipment.

VOL (Volume)

The volume can be adjusted.
To increase the volume, press
To decrease the volume, press
 
View when or
* Note that the volume level remains stored even when
you turn OFF the power.
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.

MUTE

The sound can be temporarily muted.

Press .
The sound is muted.
To restore the original sound volume, press the button
again.
The volume can also be restored by pressing

.
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.

.

.
is pressed

or
E-17