Basic Operations; Turning On The Power; Turning Off The Power; Adjusting The Volume - Fujitsu Plasmavision PDS4241 User Manual

BASIC OPERATIONS

TURNING ON THE POWER

* You can also use the
switches on the display's
control panel to accomplish
these steps.

TURNING OFF THE POWER

ADJUSTING THE VOLUME

14
Press the main power switch at
1
the bottom of the display.
When you do so, the main power turns ON.
Press
2
control.
When you do so, the power indicator lamp turns
green.
3 Press or
desired input mode.
Press when the power is ON.
The power indicator lamp turns red.
Press to increase the volume.
Press to reduce the volume.
Any value between 0 and 40 can be selected.
* "No Audio" appears if you press
selected "No Audio" for "Audio Input". (See P. 35.)
* Note that the volume level remains stored even when you
turn OFF the power.
* As Audio Input is set at "No Audio" in the factory settings,
the sound volume cannot be adjusted.
on the remote
to select a
or after you have
When the volume adjustment button is pressed