BASIC PROCEDURES OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the
options on the ADJUSTMENT MENU. (Ex.: Adjusting tint
setting (Tint))
• Selecting the adjustment mode for adjustment or setting.
(The items to be adjusted or set are stored for each
adjustment mode.)
1
Press
.
"PICTURE" selected in the main
menu screen
The main menu screen will appear.
2
Press
or
Each time you press
menus appears in the following sequence:
PICTURE POSITION/SIZE AUDIO
FEATURES FACTORY DEFAULT
The PICTURE Menu screen will appear.
3
Press
or
"Tint" selected in the PICTURE
Menu screen
4
Press
.
The "Tint" adjustment screen will appear.
E-24
to select "PICTURE".
or
, one of the available
to select "Tint".
5
Press
or
"Tint" adjustment screen
: More greenish colors
: More purplish colors
6
Press
to store.
7
Press
when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select "Default" and press
are changed back to the default settings available
when the plasma display was purchased.
* Press
to halt the operation in progress.
to change tint values.
. The PICTURE items