Direct Setting (Rgb); Code Setting (Rgb); White Screen; Exhibition Mode - Fujitsu Plasmavision P42XTA51US User Manual

Direct Setting (RGB)

You can use this option to switch the setting for RGB input
signal.
 
Each time you press or
appears in the following sequence:
[Auto]: The optimum display is obtained automatically for
input signals.
[Other than Auto]: The optimum resolution setting is
fixed for each signal.

Press to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA,
WXGA, SXGA and SXGA+ may not be automatically
detected for optimal use.
* Depending on the model or input terminals, some signals
may not be available and therefore, not displayed.

Code Setting (RGB)

Normally, use this option in Auto mode.

White Screen

You can use this option to display white over the entire screen
to minimize phosphor burn-in.
 
Each time you press or
appears in the following sequence:
 Off  On 

Press to store.

Exhibition Mode

This feature makes the picture adjustments revert to the default
setting of adjustments you can prepare and memorize. This is
useful in installations where unsupervised persons are likely to
make temporary picture adjustments not optimum for the
plasma display's ongoing purpose.
 
Each time you press or
appears in the following sequence:
 Off  On 

Press to store.
* In Exhibition mode, the display returns to the memorized
setting after about 5 minutes even if the adjustment is
changed.
The setup will be cancelled when AC power is cut to the
plasma display's power cord (e.g. power failure, unplugging
the power cord, and so on).
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model, or the types of signals, some of the functions may not be available.
• The adjustment range varies depending on the display signal. Adjust to a desired picture quality in the allowable adjustment range.
• Setting and adjustment may be disabled depending on the signal type.
, one of the available choices
, one of the available choices
, one of the available choices

Information

Displays system operation status.
Select "Information" and press
The "Information" screen will appear.
[Mode]: The input mode or channel number is displayed
[Freq. Scan Mode]: Frequency scanning
[Input Signal]: Video mode
[Input Sync.]: Sync. Signal type
[Freq.]: Sync. Signal frequency, polarity
[Preset No.]: RGB code number
[Program No]: Channel-assigned number
"Information" Screen (example of Video mode)
"Information" Screen (RGB mode)
"Information" Screen (example of TV mode)

.
E-39