Example Of Connecting External Equipment - Fujitsu Plasmavision P42XTA51US User Manual

EXAMPLE OF CONNECTING EXTERNAL EQUIPMENT

• Connect the Video signal cable to the HDMI input terminal, Component Video input terminal, S-Video input terminal, or the Video input
terminal.
• If the equipment to be connected is equipped with HDMI out put terminal and Component Video output terminal, it is recommended to
connect to only one of the terminals. If the HDMI output is connected, an Audio signal cable does not need to be connected.
To S-Video
To HDMI
output
output
To Component
Video output
• The table below shows the settings of Audio inputs. (Factory setting)
* For changing of Audio input settings, see Audio Input on P. E-38.
Video input
RGB1(D-sub)
Video1(Video)
Video2(S-video)
Video3(Component Video)
Video4(Component Video)
Video5(HDMI)
Note
• Unplug the power cord from the AC outlet before you connect external equipment.
• You should also refer to the instructions for the equipment to be connected.
E-16
To Audio output
To Video output
To Component
Video input
To S-Video input
Audio input
Audio1
Audio2
Audio2
Audio3
Audio3
Audio4(HDMI)
DVD or VCR
To Video
input
To Audio input
Bottom of the plasma display
To HDMI input