Fujitsu Plasmavision P42XTA51US User Manual page 7

DISPLAY SECTION –BOTTOM
 External speaker output terminal (EXT. SP)
Connect these terminals to the speakers.
When connecting a cable, attach a ferrite core to the cable. (See P. E-14.)
* For details, see the speaker unit installation manual.
 Video5 input terminal (VIDEO5 INPUT/HDMI)
Connect this terminal to the HDMI output terminal of DVD recorder/player or other video source.
 RS-232C terminal (RS-232C)
This terminal is provided for you to control the plasma display directly from a PC. Connect it to the RS-232C terminal on the PC.
 RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the output terminal of a PC, set-top box, game, etc.
 Maintenance terminal (SERVICE ONLY)
This terminal is only for access by an Authorized Service Engineer. This should never be used by the end user.
 CABLE CARD slot (CABLE CARD)
To receive cable TV programs insert the card supplied from cable TV provider. (See P. E-12.)
 Digital audio output terminal (AUDIO OUTPUT DIGITAL)
Connect this terminal to the digital audio input terminal of the audio amplifier.
 Analog audio output terminal (AUDIO OUTPUT ANALOG)
Connect this terminal to the analog audio input terminal of the audio amplifier.
 Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
 Audio2 input terminal (AUDIO2 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
 Audio3 input terminal (AUDIO3 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
 Video1 input terminal (VIDEO1 INPUT/VIDEO)
Connect this terminal to the Video output terminal of VCR or DVD recorder/player.
 Video2 input terminal (VIDEO2 INPUT/S-Video)
Connect this terminal to the S-Video output terminal of VCR or DVD recorder/player.
 Video3 input terminal (VIDEO3 INPUT/Y P
Connect this terminal to the Component Video Output terminal of DVD recorder/player or satellite receiver.
 Video4 input terminal (VIDEO4 INPUT/Y P
Connect this terminal to the Component Video Output terminal of DVD recorder/player or satellite receiver.
 Cable TV antenna input terminal (Cable In)
Connect this terminal to the cable TV antenna signal.
 VHF/UHF antenna input terminal (Antenna In)
Connect this terminal to the VHF/UHF antenna signal.
 Power input terminal
Connect this terminal to the power cord supplied with the plasma display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-14.)
 Expansion terminal (EXP. PORT)
Currently, this terminal is not functional and is provided to accommodate future technology enhancements. Do not connect any cable to
this terminal.
P )
B R
P )
B R
E-7