Basic Operations - Fujitsu Plasmavision P42HTS40G User Manual

BASIC OPERATIONS

TURNING THE POWER ON AND STAND-BY
* You can also use the buttons
on the display's control
panel to perform these steps.
E-24
1

Press OFF/ON
bottom of the display and
the left at the bottom of the AV
Selector to the STD-BY state.
The power lamp lights up.
2

Press on the remote control.
The color of the power lamp changes from "Red" to
"Green".
3

Press , the button of the channel
you want to watch, and then press
 
or .
Select TV or the picture mode to input.
4

Press when the power is ON.
The color of the power lamp changes from "Green" to
"Red" and the display goes into standby state.
/I to the left at the

/I to