TO RECEIVE CABLE TV PROGRAMS (WITHOUT CableCARD)
(Continued from page E-11)
* To watch cable TV broadcasts, sign up with a cable-TV provider before installing and connecting the Plasma display. For details,
contact the cable-TV provider.
5. Connect the plasma display's power cord to the outlet, and turn on the power. (For details, see "Power ON"
(P. E-17).)
6. Press
to select the TV mode.
7. The First Setup screen is displayed. Set the date and time.
8. Press
to select signal of Cable In.
9. Perform Auto Scan. For details, see "TUNER SETTING - Auto Scan - Cable" (P. E-33).
10. Select a desired program.
TO RECEIVE TERRESTRIAL TV PROGRAMS
5. Connect the plasma display's power cord to the outlet, and turn on the power. (For details, see "Power ON"
(P. E-17).)
6. Press
to select the TV mode.
7. The First Setup screen is displayed. Set the date and time.
8. Press
to select signal of Antenna In.
9. Perform Auto Scan. For details, see "TUNER SETTING - Auto Scan - Antenna" (P. E-33).
10. Select a desired program.
Note
• If the power cable is disconnected or a power failure occurs, First Setup will be displayed upon power recovery.
E-13