Download Print this page

Fujitsu Plasmavision P42VHA10W User Manual

42"/50" wide plasma display.
Hide thumbs

Advertisement

USER'S MANUAL
42"/50" WIDE PLASMA DISPLAY
P42VHA10W/P42VHA10A/
P42HHA10W/P42HHA10A/
P50XHA10W/P50XHA10A/P50XHA10U/
P42VHA20W/P42VHA20A/P42VHA20U
Before Use
• Safety Precautions ··································· E-2-E-3
• Features ····························································E-4
• Accessories ······················································ E-5
• Handy Tips ······················································· E-5
• Installation ······················································· E-6
Usage
• Part Names and Functions ···················· E-7-E-10
• Using the Remote Control ··················· E-11-E-12
······························································· E-13-E-17
• Basic Operations ·································· E-18-E-19
• Selecting Input Mode ·····································E-20
• Other Basic Operations ································· E-21
······························································· E-22-E-23
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
Contents
Page
• Adjustment Menu ········································· E-24
(POSITION/SIZE Menu) ························ E-28-E-29
• Adjusting AUDIO (AUDIO Menu) ········ E-30-E-31
······························································· E-32-E-38
(FACTORY DEFAULT) ·····································E-39
Others
• Options ····························································E-40
• Factory Settings ············································ E-41
• Specification ········································· E-42-E-44
• Cleaning and Maintenance ···························· E-45
Page

Advertisement

   Also See for Fujitsu Plasmavision P42VHA10W

   Related Manuals for Fujitsu Plasmavision P42VHA10W

   Summary of Contents for Fujitsu Plasmavision P42VHA10W

  • Page 1: Table Of Contents

    USER’S MANUAL 42”/50” WIDE PLASMA DISPLAY P42VHA10W/P42VHA10A/ P42HHA10W/P42HHA10A/ P50XHA10W/P50XHA10A/P50XHA10U/ P42VHA20W/P42VHA20A/P42VHA20U Before Use • Safety Precautions ··································· E-2–E-3 • Features ····························································E-4 • Accessories ······················································ E-5 • Handy Tips ······················································· E-5 • Installation ······················································· E-6 Usage • Part Names and Functions ···················· E-7–E-10 •...

  • Page 2: Safety Precautions

    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.

  • Page 3

    12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel.

  • Page 4: Features

    FEATURES Variety of input signals • The unit features four video and four S-video input terminals, and five component video terminals. • In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high definition picture quality.

  • Page 5: Accessories

    ACCESSORIES CHECKING ACCESSORIES One remote control Two AA batteries HANDY TIPS • Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/ 1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working. •...

  • Page 6: Installation

    INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation.

  • Page 7: Part Names And Functions

    PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT ① ② Control Panel (Right side of display) Warning If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer.

  • Page 8

    PART NAMES AND FUNCTIONS (Continued) DISPLAY SECTION – LOWER PART Bottom (P42VHA10 type) Bottom (P42HHA10 type) Bottom (50”) Bottom (P42VHA20 type) /I power switch When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON can be turned “ON”...

  • Page 9

    6 External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.) *See the speaker instruction manual for more information. 7 Audio1 input terminal (AUDIO1 INPUT) 8 Audio2 input terminal (AUDIO2 INPUT) 9 Audio3 input terminal (AUDIO3 INPUT) Connect this terminal to the sound output terminal of your VCR, etc.

  • Page 10: Remote Control

    PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page button Switches between power ON and standby state. 3 DISPLAY OFF button For showing on-screen-information. 4 PICTURE MODE button Switches the picture mode. 7 RGB input mode selector button [RGB 1 –...

  • Page 11: Using The Remote Control

    USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide it outwards while pressing it down. PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet;...

  • Page 12: Effective Range For The Remote Control

    USING THE REMOTE CONTROL (Continued) EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. Left Display –...

  • Page 13: Connecting The Display To External Equipment

    CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model.

  • Page 14

    CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Speaker VCR or other external components See P. DVD player E-14 Display Satellite tuner Speaker (optional) Remote control...

  • Page 15

    • Connect the video signal cable to either the S-video input terminal or the video input terminal. To audio outputs To video output To S-video output To audio inputs Note • Unplug the power cord from the AC outlet before you connect external components. •...

  • Page 16: Dvd Player

    CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) DVD PLAYER • Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. • If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.

  • Page 17

    • As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. • The PC can be connected to either the front side or the rear side, whichever is most convenient. To RGB output (DVI-D) To RGB output (mD-sub) To audio output...

  • Page 18: Basic Operations

    BASIC OPERATIONS TURNING THE POWER ON AND OFF Press of the display to the ON The power lamp lights up. Press The color of the power lamp changes from “Red” to “Green”. Press Select the video mode to be input. Press The color of the power lamp changes from “Green”...

  • Page 19: Adjusting The Volume

    ADJUSTING THE VOLUME Press the Volume button Press to increase the volume. Press to reduce the volume. Any value between 0 and 40 can be selected. * Note that the volume level remains stored even when you turn OFF the power. Muting the sound Press The sound is removed.

  • Page 20: Selecting Input Mode

    SELECTING INPUT MODE VIDEO INPUT MODE * You can also use the buttons on the display’s control panel to perform these steps. RGB INPUT MODE E-20 Press the – buttons to select the input mode. You can select from VIDEO1 mode to VIDEO4 mode.

  • Page 21: Other Basic Operations

    OTHER BASIC OPERATIONS CONVENIENT FUNCTIONS On-screen information (DISPLAY) Press The mode is indicated on the screen for 5 seconds. Picture Mode (PICTURE MODE) Press This button can be used to switch the picture mode. In the picture mode, you can switch between the set status and the fine mode. * For the picture mode settings, see “Setting Picture Mode (P.

  • Page 22: Watching Pictures On The Wide Screen

    • A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.

  • Page 23: Screen Size

    SCREEN SIZE Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio). Auto The screen size changes automatically in accordance with the contents of image software you use. Wide1 Displays natural-looking pictures of standard size on the wide screen. Wide2/Wide Ideal for displaying vertically extended pictures such as squeezed pictures and recorded HDTV programs.

  • Page 24: Adjustments

    ADJUSTMENT MENU ADJUSTMENT MENU PICTURE MENU POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT E-24 Contrast Brightness Color Tint Sharpness Picture Mode PrecisionSetting Luminance Noise Reduction * Black Level Picture Memory Colour Temp. User Colour Temp. Position *: for other than RGB Size Treble Bass Balance...

  • Page 25: Adjusting Pictures (picture Menu)

    ADJUSTING PICTURES (PICTURE MENU) BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)] You can make changes to all picture adjustment options in the PICTURE Menu. The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes.

  • Page 26

    ADJUSTING PICTURES (PICTURE MENU) (Continued) • Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart. Select the item with , and then adjust with Adjustment Item Contrast Lower contrast Brightness Darker screen Color Lighter colors Tint More purplish colors...

  • Page 27

    • Setting Noise Reduction (Noise Reduction) Can select the noise reduction setting corresponding to the noise level of the input signal. Each time you press ,one of the available choices appears in the following sequence: Off: Noise reduction does not function. Min.: Weak setting Std.: Standard setting Max.: Strong setting...

  • Page 28: Adjusting Screen Position And Size (position/size Menu)

    ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION] You can make changes to all screen adjustment options in the POSITION/SIZE Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.

  • Page 29

    Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Moves screen to the left. Vertical position (Vertical) : Moves screen up. : Moves screen down. Press to store. Adjusting Screen Size (Size) Screen width (Width) : Increases width.

  • Page 30: Adjusting Audio (audio Menu)

    ADJUSTING AUDIO (AUDIO MENU) BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)] You can make changes to all sound adjustment options in the AUDIO Menu. The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.

  • Page 31

    Adjusting Treble (Treble) Any value between -6 and +6 can be selected. : Stronger treble : Weaker treble Adjusting Bass (Bass) Any value between -6 and +6 can be selected. : Stronger bass : Weaker bass Adjusting Volume Balance (Balance) Any value between -10 and +10 can be selected.

  • Page 32: Other Adjustments (features Menu)

    OTHER ADJUSTMENTS (FEATURES MENU) BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)] You can make the following changes in the FEATURES Menu. Press The main menu screen will appear. Press “FEATURES”. Each time you press menus appears in the following sequence: PICTURE The FEATURES Menu screen will appear.

  • Page 33

    • FEATURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Allows setting of 24-frame mode. (See P. E-34.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.) Input Terminal : Can make an input terminal setting such as Video Input.

  • Page 34

    OTHER ADJUSTMENTS (FEATURES MENU) (Continued) FUNCTION • Displaying the optimum movie pictures (24 Frame Mode) Can make the optimum display of 24 frames/second signals such as movie pictures. Each time you press , one of the available choices appears in the following sequence: On : Displays the optimum movie pictures.

  • Page 35

    SETTING THE INPUT TERMINALS • Selecting Video Mode (Video Input) You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal. Each time you press , one of the available modes appears in the following sequence: Auto1: Automatically selects NTSC, PAL and SECAM.

  • Page 36: Other Settings

    OTHER ADJUSTMENTS (FEATURES MENU) (Continued) OTHER SETTINGS DPMS You can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving function. This function causes on-screen information to disappear until the next input operation, if the power is ON and the display has not received any signals for the predetermined period of time.

  • Page 37

    • Minimizing phosphor burn-in (Screen Orbiter) You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below. (1) Select “Screen Orbiter” and press The “Screen Orbiter” setting screen will appear. (2) Press to select “Mode/Time”. (3) Select a desired pattern.

  • Page 38

    OTHER ADJUSTMENTS (FEATURES MENU) (Continued) • Specifying RGB Input Signal (Code Setting) You can use this option to specify and display the type of RGB input signal by code number. Each time you press , one of the available choices appears in the following sequence: Auto Manual...

  • Page 39: Initialization Of User Adjustment Value

    INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT) You can restore the values of the adjustment/setting made in the MENU to factory settings. Press The main menu screen will appear. Press DEFAULT”. Each time you press menus appears in the following sequence: PICTURE The FACTORY DEFAULT Menu screen will appear.

  • Page 40: Options

    To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer. CAUTION: This display (P42VHA10/P42HHA10/P50XHA10/P42VHA20) is for use only with Fujitsu General Limited’s option (P-WB4200, P-CT4200, P-TT4200). Using this display with other option can cause instability resulting in possible injury.

  • Page 41: Factory Settings

    FACTORY SETTINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the parameters.

  • Page 42: Specification

    SPECIFICATION Model Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) Weight 28.5 kg / 62.8 lbs Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm 40.8 (W) x 25.3 (H) x 3.3 (D) inch Power supply 110–240 VAC 50/60 Hz...

  • Page 43

    • Specifications and external appearance may be change for the sake of improvement. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. P50XHA10W/P50XHA10A 120 VAC 50/60 Hz 4.9 A...

  • Page 44

    EMC: AS/NZS 3548 • Specifications and external appearance may be change for the sake of improvement. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. E-44 P42VHA20W/P42VHA20A...

  • Page 45: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control.

Comments to this Manuals

Symbols: 0
Latest comments: