Settings Menu; Communication; Apply A Menu Theme; Service - Barco F70-W8 User Manual

9. SETTINGS MENU

Overview
•

Communication

•

Apply a menu theme

•

Service

9.1 Communication
About
System settings / Communication
Current Ethernet communication information is given, and can be edited in this menu.
Default mode for Ethernet communications are: Automatic ON / IP Version 4 DHCP mode.
Setting
Automatic
ON
OFF
IP version 4
Static mode
DHCP mode
Manually set up the IP adress
Go to the menuSystem settings / Communication / LAN
Enable the Auto zone on the display and press enter. The Auto zone will change to "Manual".
Scroll down, and modify the desired fields. When in the desired fields, press "Enter" to enable the virtual keyboard, enter the desired
values, and press "Enter" again to confirm the change.
9.2 Apply a menu theme
About
System settings / Themes
Themes are used to apply a predefined functionality to the OSD display. There are two options: light (default) or dark.
9.3 Service
About
System settings / Service
The Service Menu is for service personnel and / or advanced users only.
The menu is password protected.
601–426 F70 SERIES 16/06/2017
Description
DHCP enabled
Static
Set address, subnet mask and default gateway according to network specification.
Assigned IP address, subnet mask and gateway.
9. Settings menu
59