Settings Menu - Barco F50 User Manual

5.8 Settings menu

PIN code:
network :
factory reset:
service :
DPMS :
DPMS timeout :
LED indicators mute: Disable all LED indicators on the back of the projector. A critical error (status LED
menu timeout:
background:
splash:
baudrate:
39
Protect the projector from usage with a PIN. If enabled the projector will ask for
the PIN at every start up.
Set IP address, Subnet mask and default gateway TCP/UDP port number.
DHCP is supported and is enabled by default, but can be disabled.
Restore all settings to the factory defined values.
End user protected settings. Access PIN code required.
Enable or disable DPMS power saving. This feature is used to automatically
power down the projector if no source is detected for a given period of time
(defined by DPMS time-out). If the projector is powered down in DPMS power
save, it will automatically power back on if a valid source is acquired.
Set the period of time before the projector automatically enter DPMS mode.
DPMS must be enabled for this menu item to active.
flashing RED) will still be enabled.
The time interval before the OSD is automatically disabled. Option of "never" is
available if the OSD is never to time out.
Gives a choice between white, gray or black background color.
Possibility to choose between logo or black for the startup splash screen.
Presents alternative bauderate settings (Bd):
4800, 9600, 19200, 38400, 57600, 115200