ICP DAS USA PCI-1202L User Manual page 45

PCI-1202/1602/180x Series Card
Multi-Function Boards
3. Wire the digital multi-meter to D/A channel_0, and then keep set the J1 jumper to 10 V
voltage (refer to Sec.

The PEX-1202 and PCI-1202/1602/1802 Series :
Connect the positive probe (+) of Multi-meter to D/A_out0 (Pin 18).
Connect the negative probe (-) of Multi-meter to A.GND (Pin 17).

The PCI-1800 Series :
Connect the positive probe (+) of Multi-meter to D/A_out0 (Pin 30).
Connect the negative probe (-) of Multi-meter to A.GND (Pin 29).
2.2.2), and wire the signals as follows:
User Manual/ Ver. 4.8/ Mar. 2015/ PMH-0014-48/ Page: 45