ICP DAS USA PCI-1202L User Manual page 115

PCI-1202/1602/180x Series Card
Multi-Function Boards

demo4: two board, same as demo3

demo5: one board, M_function_1 demo

demo6: two board, same as demo5

demo7: one board, M_function_2 demo

demo8: two board, same as demo7

demo9: one board, M_function_3 demo

demo10: two board, same as demo9

demo11: one board, MagicScan demo

demo12: two board, same as demo11

demo13: one board, continuous capture demo

demo14: two board, continuous capture demo

demo15: all installed board, D/I/O test for board number identification

demo16: one board, performance evaluation demo

demo17: one board, MagicScan demo, scan sequence: 120

demo18: one board, MagicScan demo, scan 32 channel, show channel 0/1/15/16/17

demo19: one board, A/D calibration.

demo20: two board, P180X_FUNA, continuous capture demo

demo21: single board, P180X_FUNB, continuous capture demo

demo22: single board, P180X_FUNB, 330 k, 2.5 min, continuous capture 99 M bytes

demo23: single board, post-trigger demo

demo24: single board, pre-trigger demo

demo25: single board, middle-trigger demo

demo26: single board, pre-trigger demo for version-C

demo27: single board, middle-trigger demo for version-C

demo28: multi-task, critical section driver demo

demo29: testing for MagicScan controller.

demo30: testing for Pacer Trigger.

Demo31: testing for Polling.

Demo32: monitoring the incoming data from MagicScan, then set a digital out bit on when the
incoming data exceed a defined threshold.

Demo33: MagicScan total sample rate=176 k/sec for 8 channels.

Demo34: continuous capture scan total sample rate=33.3 k/sec for 32 channels and save to disk (for DOS
only).
For detailed information about the DLL function of the PCI-1202/1602/180x series,
please refer to DLL Software Manual (CD:\NAPDOS\PCI\PCI-1202 (or
PCI-1602/180x)\Manual\)
User Manual/ Ver. 4.8/ Mar. 2015/ PMH-0014-48/ Page: 115